AMERICAN COACH INFORMATION
Eagle and Tradition Information
ELECTRICAL CIRCUIT BREAKER PANELS, CIRCUIT FUSE PANELS AND
BATTERY DISCONNECT SWITCH LOCATIONS
American Eagle and Tradition (Front Entry Door Models)
• Chassis 12-Volt Fuse Front Panel ................................. In the entry step-well
• Chassis Fuse 12-Volt Rear Panel .................................. In the battery compartment
• Chassis Engine Preheat 12-Volt Breaker ...................... Under the bedroom engine access cover
• Chassis 12-Volt Battery Disconnect Switch .................. Rear engine access compartment
• House 12-Volt Battery Disconnect Switch .................... In the battery compartment or by the entry door
• House 12-Volt Fuse Panel ............................................. Under the bed
• House 120-Volt Breaker Panel ...................................... Under the bed
A
CAUTION
Before relamping, disconnect power source by remov-
ing fuse or placing circuit breaker and control switch in
OFF position.
Halogen bulbs operate at extremely high temperatures
and pressures and will shatter if not handled correctly.
Always use a soft dry cloth or cotton gloves when han-
dling halogen bulbs.
Do not touch glass area with bare hands. If bulb is
touched with bare hands, wipe the bulb clean with rub-
bing alcohol.
Do not use near flammable or combustible materials
and/or objects which may be sensitive to fading or drying.
Use bulbs designed or specific by manufacturer as to
style, wattage and Voltage.
A
WARNING
Do not install 12-volt fuses or 120-volt breakers with
amperage ratings greater than that specified on the
device or label. Doing so constitutes a fire hazard.
04-1