JVC KD-LX50 Instructions Manual page 60

Symptoms
• Your voice commands (either
Operation or Access
Commands) do not operate
the receiver.
• You cannot use all Operation
Commands.
• The receiver operates
unintentionally when another
person speaks in your car.
• You cannot register your own
commands.
• This unit does not work at all.
• The CD changer does not
work at all.
60
Causes
Microphone is not connected.
Voice control unit is not
connected.
Your voice does not reach the
microphone.
"USER" is selected for "VOICE
WORD." In this case, you can
use only the Operation
Commands for which you have
registered your own voices.
"STANDARD" is selected for
"VOICE WORD."
"STANDARD" is selected for
"VOICE WORD."
Noises inside or outside the car
will interfere.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Remedies
Connect it correctly.
Connect it correctly.
Attach the microphone to the
place indicated in the
Installation/Connection manual
(separate volume).
Register your own voices for all
Operation Commands.
Select "USER" for "VOICE
WORD." (See page 39)
Select "USER" for "VOICE
WORD." (See page 39)
Change the microphone position
or take any other methods to
eliminate the noises.
Press the reset button on the
front panel. (See page 2)