Tuning In To A Preset Station - JVC KD-LH2000R Instructions Manual

4
Repeat the above procedure to store
other stations into other preset
numbers.
Note:
A previously preset station is erased when a new station
is stored in the same preset number.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see "Storing stations in
memory" on page 11.
Selecting a preset station directly
1
Select the band (FM1 – 3, AM).
FM1
2
Select the number (1 – 6) for the preset
station you want.
12
FM2 FM3 AM
Selecting a preset station using the
preset station list
If you forget what stations are stored in what
preset numbers, you can check the preset station
list, then select your desired station on the list.
1
Select the band (FM1 – 3, AM).
FM1 FM2
2
Press and hold 5 (up) or ∞ (down) until
the preset station list for the current
band (FM1, FM2, FM3, or AM) appears
on the display.
Notes:
• If one of FM band preset station lists (FM1,
FM2, or FM3) is shown on the display, you can
show the other lists by pressing 5 or ∞.
• If a preset station is an FM RDS station with
PS signal, PS name will be shown instead of
the station frequency.
3
Select the number (1 – 6) for the preset
station you want.
FM3 AM