Table of Contents
Advertisement
2.4 Connecting Source Cables
All of the
signal inputs are on input modules housed in an electronic cage assembly accessible
Bengal
from the left side of the
Analog and Digital Connectors
There is one analog 15-pin VGA type connector
and one standard DVIconnector as data inputs to the
Bengal. The DVI connector also doubles as a second
analog connector when used with a VGA to DVI-
adapter.
The Bengal will accept a wide range of computer
resolutions up to UXGA (1600x1200). These connec-
tors are also used for RGB video with separate H&V
sync, composite sync, or sync on green and HDTV.
Video Connections
The Bengal has three video inputs: Composite
video on a yellow RCA connector, S-Video on a 4-pin
DIN connector and Component video on red (Pr),
green (Y) and blue (Pb) RCA connectors.
All three are compatible with NTSC, PAL and
SECAM.
Audio Connections
There are three stereo audio inputs using RCA
connectors. There is one stereo audio (line out) out-
put using RCA connectors and one pair of switchable
3.5mm monaural audio connectors for external
speakers. When external speakers are used the inter-
nal speakers are switched off.
Control Connections
There is one RS232 input and one RS485 input for
controlling the Bengal. There is one RS485 loop
through output that is used as the loop through for
both RS232 and RS485.
Power Connection
AC power is connected to the Bengal at the bottom
left side of the display. An AC power cord is provided
in the accessory kit.
International users will need to provide the proper
AC cord that conforms to the standard of their coun-
try.
18
.
Bengal
Advertisement
Table of Contents
