Table of Contents
Advertisement
2.1 What You Will Do
This is an overview of the entire installation and setup process. The numbers in parentheses are page
numbers in this User Guide where more detailed information is available.
Installation
1. Unpack the Bengal carefully (14).
2. Hang the Bengal on a wall or optional stand (14).
DO NOT lay the Bengal on its back or face.
3. Connect the source cables (Data, Video, Audio)
(18).
4. Connect control cables if needed (RS232,RS485)
(20).
5. Connect Power (18).
6. Turn on power switch (22).
7. Press the on button on the remote control (46).
8. Press the source button to select source (62).
Configuration
1. Align the image (22).
2. Adjust data input levels (28).
3. Adjust frequency and phase (30).
4. Adjust for video source (34).
5. Adjust the image size (40).
6. Save your settings (42).
12
Advertisement
Table of Contents
