Table of Contents
Advertisement
2.3 Installing the
The
is meant to be installed on a wall or on an optional stand. It is not designed to sit on its
Bengal
own.
Introduction
The Bengal can be attached to a wall or to an
optional stand. Hardware for mounting is provided in
the accessory kit. Included in the accessory kit are
two mounting bars. The larger of the two is the main
wall mounting bracket. The smaller one is used as a
spacer to keep the Bengal vertical when mounted on a
wall or attached to a stand.
Mounting on a wall
The Bengal weighs about 106 pounds (48.08kg).
The mounting method that you use must be able to
support five times this weight (530lbs., 240.4kg).
Make sure that the wall can support it. Dry wall may
not be sufficient to handle the weight.
The illustration on the right shows the wall
mounting bracket installed on a wall. The wall
mounting bracket is firmly attached to the studs in
the wall. To prevent the wall mounting bracket from
bending, due to the weight of the Bengal , there must
be bolts placed within 7.5 inches from each end.
The inset on the illustration highlights a pin on
the main wall mounting bracket that mates with a
hole in the slot on the back of the Bengal.
CAUTION
Do not lay the Bengal on its face or on its back.
It must be kept upright at all times.
Mounting Bengal on a wall.
1. Install wall mounting bracket bar on wall. Make
sure the wall mounting bracket is straight and
level. If the wall is uneven, use shims to insure
the wall mounting bracket is straight. Be sure to
attach to studs in the wall.
2. Hang the Bengal on the wall mounting bracket
bar. Make sure the holes in the Bengal wall
mounting bracket slot mate with the pins on the
hangar bar.
16
Bengal
Wall mounting bracket installed. Inset shows one of
the two pins that mate with the holes in the slot in the
Bengal
back of the
.
Bengal
Back of
showing wall mounting bracket slot.
Inset shows one of the two holes that mate with the
pins on the wall mounting bracket.
Bengal
being lifted in to place on the wall. The slot
fits over the wall mounting bracket and is fitted onto
the mating pins.
Wall mounting
bracket on wall
Advertisement
Table of Contents
