4.0
Studio One Artist Quick Start
4.3
Configuring MIDI Devices (AudioBox iTwo)
3. Click the Add button. This opens the Add Device window.
4. From the menu on the left, select New Keyboard. At this point, you can customize
5. You must specify which MIDI channels will be used to communicate with
6. In the Receive From drop-down menu, select the MIDI-interface input from which
7. In the Send To drop-down menu, select the MIDI interface output (AudioBox
8. If this is the only keyboard you'll use for controlling your external
the name of your keyboard by entering the manufacturer and device names.
this keyboard. For most purposes, you should select all MIDI channels.
If you're unsure of which MIDI channels to choose, select all 16.
Studio One Artist will receive MIDI data. In this case, it's the AudioBox iTwo.
iTwo) from which Studio One Artist will send MIDI data to your keyboard.
Power User Tip: If your keyboard controller doesn't need to receive MIDI
data from Studio One, you can leave this unselected. If your keyboard
does need to receive MIDI data, you must connect a MIDI cable from the
MIDI Out of the MIDI interface to the MIDI In of the keyboard.
synthesizers and virtual instruments, you should check the box
next to Default Instrument Input. This automatically assigns your
keyboard to control all MIDI devices in Studio One Artist.
Click OK.
If you have a sound module that you'd like to connect, leave the
External Devices window open and proceed to the next part of this
section. If not, you can close this window and skip to Section 4.4.
AudioBox
iOne and iTwo
™
Owner's Manual
21