Advertisement
Components
1
4
Standard Mounting Methods
Fixture mounting positions:
It is recommended that the LED fixtures be installed into a space no smaller than 3 in. x 3 in. (76mm x 76mm) For
additional mounting practices refer to application notes on our website (www.gelightingsolutions.com)
Ceiling
Fixture rotation:
Light can be directed from 0 to 50 degrees in 10 degree increments in both directions with the help of 1) the rotation
angle of the fixture, and 2) the mounting edge of the fixture track.
50°
Material Estimations
For material estimations, take the length of the run in feet divided by 1.05 feet to get the quantity of fixtures needed.
Take the run in feet divided by 4 feet to get the quantity of mounting tracks needed.
2
3
6
5
Ceiling
20°
30°
40°
1
GE LED Wall Washer Fixtures
2
Leader Cable with End Cap (62208, 62211)
3
Mounting track with bracket (65467)
4
UL approved 18-14 AWG (0.82-2.08 mm
connectors or In-Line Splice Connector (75545)
5
#10 (M5) self-tapping flathead screws
6
(Optional) jumper cable (62209: 12 in. /305 mm long,
62210: 48 in./1219 mm long)
Mounting surface
10°
10°
20°
0°
Ceiling
Mounting track can be installed
at 0 and 30 degree angles
Fixture has three positions
at 10 degree increments
30°
40°
50°
) wire
2
Ceiling
Advertisement
