Important Terminology - Bailey Approach Owner's Manual

INTRODUCTION

Important Terminology

i
MODEL: This handbook refers to all of the
Peugeot based Approach models built on an AL-
KO chassis.
Gas System: This system is for use on vehicles
with a 30mb gas system. The gas system
pressure is noted on a label inside the gas locker.
Conversion Type: Your vehicle is classed as
a coachbuilt motorhome made with insulated
laminated panels with a GRP outer skin. (Type
Approval class M1 SP)
Climatic Conditions: The Approach SE range
of motorhomes is designed for use in extreme
temperature climates and has been tested to
Grade 3 in accordance with EN1646-1:2004.
Handbook: Any queries should be addressed to
your Bailey Retailer.
Appliance Instructions:
instructions have been extracted from those
supplied by the appliance manufacturer.
Automotive- Peugeot: For all your Bailey
motorhomes' automotive requirements please
refer to the Peugeot vehicle instruction
handbook or your local Peugeot Dealer.
Tyre Pressures:
The appliance Your Bailey Motorhome is fitted with Michelin
Agilis Camping tyres. These tyres are designed
to run at 80 Psi on the rear axle for all loads
when used in a single fitment. The front tyre
pressure can be set depending on the maximum
in service vehicle loads. The correct cold tyre
pressure for your vehicle is labelled on the
inside of the passenger door frame.
The tyres are 215/70 R15 CP 109Q.
Chassis Number: Record both the chassis
number and the production number of your
motorhome and store it safely at home.
The chassis number is a 17 digit number this
can be found:
• On a small "window" in the bottom left hand
corner of the front windscreen.
• On the plate under the bonnet.
• On the European Whole Vehicle Type Approval
plate which can be found in the gas locker.
You will find
• The plate under the bonnet relates to the
base vehicle data and maybe replaced with an
AL-KO plate if the weight has been upgraded.
• The motorhome conversion plate can be
found inside the glove box. The production
number is found on the plate and is another
alphanumeric code of 17 digits. Above the
production number you will find the MTPLM
and MRO information.
• There is also a helpful weights and dimensions
label that is under the drivers' sun visor.
Production Number: This is an alphanumeric
code and is found in the glove box.