Inserting A Cac Or Piv Card; Battery; Reader Error Massages - baiMobile 3000MP User Manual

Inserting a CAC or PIV card

As noted above, the reader does not have a power on or off button. Insert your CAC or PIV
smart card into your reader, with the front of the card facing you, will power on the reader.
Removing the CAC or PIV card will power off the reader.
NOTE: When used in the Bluetooth mode, the reader's radio functions are only enabled
when your CAC or PIV is firmly inserted into the reader as shown below.

Battery

Your reader contains a removable, rechargeable battery. This battery is a custom battery,
built specifically for the baiMobile 3000MPReader. In the event that your reader's battery
no longer holds a charge, please contact support@baimobile.com for a replacement battery.

Reader Error Massages

"NO CARD!"
This is displayed when the reader is powered-on without any card inserted. This can happen
if the user uses the 'OK' button to cause power-on without a card inserted or if they plug-in
the charger to the reader without the card inserted. This indication is displayed for a few
seconds before the reader will turn itself off.
"BAD CARD"
It is displayed while the reader is powering-on with a card inserted but the reader was
unable to get the card to return an ATR (Answer To Reset) after causing card Reset.
This indication is displayed for a few seconds before the reader will turn itself
off.
14