Lamp Replacement And Filter Care - Qasair FA Installation Instructions Manual

Fa / mt / mc / uch / uv / ndch / ech / h / pyr / 3f / sf / st / maj / in / sta / smf / fas / tr ct / brh / bar / 4f / vis / pre / d 400 / d 500 / sq 420 / fpr / ma /ham / bur series ventilation hood
Table of Contents

Advertisement

36
lamp
replacement
and
Filter care
QASAIR Installation Instructions
QASAIR rangehoods are fitted with low voltage halogen lights which give a very clear, bright light. These
become very hot if left on for a long period and can burn out. Please switch off after use.
Turn off power at power point.
1.
Turn retaining ring anticlockwise and pull down.
2
Tilt lamp up slightly at retaining spring opening position and slide lamp out sideways.
3.
Unplug lamp from the ceramic connector and replace lamp.
4.
If retaining ring will not rotate, dislodge lamp by gently pushing upwards to obtain a
5.
better grip.
ROTATE ANTI CLOCKWISE TO REMOVE
Filters
For the best results, please clean filters regularly, you can do this by hand washing or placing in the
dishwasher. Try not to use any citrus or costic products as this can cause corrosion.

Advertisement

Table of Contents
loading

Table of Contents