Reset The Error Display Code - Sony MZ-R500PC Service Manual

• Description of Error Indication Codes
Problem
No error
Servo system error
TOC error
Power supply system error
Offset system error
• Description of Indication History
History code number
1
N
N1
N2
R_

4-9. Reset the error display code

After servicing, reset the error display code.
• Setting method of Reset the Error Display Code
1. Setting the test mode (see page 12).
[ENTER]
2. Press key activates the self-diagnosis result display
mode.
3. To reset the error display code, press the
the code is displayed (except "R_****").
(All the data on the 1, N, N1, and N2 will be reset)
Indication code Meaning of code
00 No error
Illegal access target
01
address was specified
02 High temperature
03 Focus error
04 Spindle error
11 TOC error
12 Data reading error
22 Low battery
31 Offset error
Focus error ABCD
32
offset error
Tracking error
33
Offset error
X1 tracking error
34
Offset error
Description
The first error
The last error
One error before the last.
Two errors before the last.
Total recording time
X key (2 times) when
Simple display
--- No error
Adrs Attempt to access an abnormal address
Temp High temperature
Fcus Disordered focus
Spdl Abnormal rotation of disc
TOC Faulty TOC contents
Data Data could not be read at SYNC
LBat Momentary interruption detected
Ofst Offset error
ABCD Focus error ABCD offset error
TE Tracking error Offset error
X1TE X1 tracking error Offset error
MZ-R500/R500PC
Description
15