Table of Contents
Advertisement
If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the cus-
tomer free of charge providing:
(a)
The fault is reported directly to the Authorised Repairer.
(b)
Proof of purchase is provided.
(c)
The fault is not caused by misuse, neglect or faulty adjust-
ment by the user.
(d)
The failure has not occurred through fair wear and tear.
(e)
The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by Husqvarna
UK Ltd..
(f)
The machine has not been used for hire.
(g)
The machine is owned by the original purchaser.
(h)
The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual
and understand how to operate and maintain your machine:
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category............................Electric Scarifier
Type(s) ............................LRC3400
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-92, EN13684, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
uct(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value
2000/14/EC: The Measured Sound Power L
ures.
Conformity Assessment Procedure...............
Notified Body.................................................
Newton Aycliffe 10/06/2010
M.Bowden
Global R & D Director - Walk behind
Husqvarna UK Ltd.
Keeper of Technical Documentation
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2010 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5064938-02
Guarantee & Guarantee Policy
EC Declaration of Conformity
pA
a h
given in the table.
& Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Level (dB(A))
Uncertainty (dB(A))
a h
Value
(m/s
2
)
Uncertainty K of a h (m/s2)
Weight (Kg)
Failures not covered by guarantee
*
Replacing worn or damaged tines
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
*
Machines used for hire are not covered by this guarantee.
*
The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim:
Tines, Electric Mains cable.
*
Caution!
Husqvarna UK Ltd. does not accept liability under the war-
ranty for defects caused in whole or part, directly or indirectly
by the fitting of replacement parts or additional parts that are
not either manufactured or approved by Husqvarna UK Ltd.,
or by the machine having been modified in any way.
at the operator's position, recorded on a sample of the above prod-
(dB(A))
WA
(dB(A))
WA
Husqvarna AB
561 82
Huskvarna
Sweden
of Flymo S.A.
values are according to the tabulated fig-
WA
LRC3400
34
3,500
0.75
93
95
78.4
2.5
1,87
1.5
9.9
Advertisement
Table of Contents
