Table of Contents
Advertisement
Cleaning (T)
• USE GLOVES
• IMPORTANT
It is very important that you keep your product clean.
Grass clippings left in any of the air intakes or under
the deck could become a potential fire hazard.
1. Remove grass from under the deck with a brush.
2. Using a soft brush - remove grass clippings from all air
intakes, the collection box and the vision window
3. Wipe over the surface of your product with a dry cloth.
• IMPORTANT
Never use water for cleaning your product. Do not
clean with chemicals, including petrol, or solvents -
some can destroy critical plastic parts.
At the End of the cutting Season
1.
Replace tines, bolts, nuts or screws, if necessary.
2.
Clean your product thoroughly.
3.
Make sure that the electric cable is coiled properly.
Storing your product: Store in a dry place where your
product is protected from damage
Fails to Operate
1. Is the correct Starting procedure being followed? See
'To Start your Lawnrake'
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre.
Poor Collection
1. Disconnect from the mains electricity supply.
2. Clean the outside of the air intakes, the discharge
chute and the underside of the deck.
3. Try a different height of rake. See 'Height Adjustment'.
4. Check condition of the Tines and replace if necessary.
See 'Removing and Fitting the Tines'.
5. If poor collection persists.
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre.
1. We strongly recommend that your product is serviced
at least every twelve months, more often in a profes-
sional application.
2. Always use genuine Spare Parts.
3. Prepacked spares are available from most Husqvarna
UK Ltd. stockists and www.flymo.com.
4. Your product is uniquely identified by a silver and
black product rating label
5.
If you have a problem with your machine contact
your local Approved Service Centre ensuring you have
full details of your product as described on the product
rating label.
•
Awareness of the environment must be considered when
disposing of 'end-of-life' product.
•
If necessary, contact your local authority for disposal
information.
The symbol
on the product or on its packaging
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
Metal Tines
Reference no.:
FLY058
Caring for your Product
T
Fault Finding Hints
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the tines are functioning correctly.
3. Replace tines if necessary
4. If vibration persists?
Lawnrake becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of cut
3. Check that the wheels can rotate freely.
4. If problem persists?
Service Recommendations
6. Should it be necessary for work to be carried out by your Serv-
A network of specialist dealers can be found in your local Yel-
low Pages. To obtain service on your product simply tele-
phone or visit your local Service Centre. Should you require
service under the terms of our guarantee the Service Centre
will require proof of purchase.
All of the centres listed stock genuine Spare Parts.
NOTE: Our Service Repairers act on their own behalf and
are not empowered to commit or legally bind Husqvarna
UK Ltd. in any manner whatsoever.
Environmental Information
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
council office, your household waste disposal service or
the shop where you purchased the product.
Replacement Parts
Part no.:
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre.
should be raised to a higher position. See Cutting
Height Adjustment.
Immediately disconnect from the mains electricity sup-
ply and consult your local approved Service Centre.
ice Centre, it is important to take your complete machine in-
cluding cable and any extension cables used.
504807001
Advertisement
Table of Contents
