Table of Contents
Advertisement
How to Use
• Do not use in wet or damp conditions. Raking in wet
conditions can damage the lawn.
• Do not force the lawnrake through long grass it should
be used on grass no longer than 75mm in length. If the
grass is long, mow the lawn prior to using the Lawn
Rake. The Lawn Rake can collect your grass clippings
while raking.
• Clear the lawn of any loose debris or stones that may
damage the lawnrake.
• On your first use choose a medium height to start with,
and then adjust the height setting to suit your lawn and
use.
• Start the lawnrake at the edge of the lawn, close to the
power point, and work away from the power point.
M
P
Q
S
How to Use cont'
Collection Box
Removing and Fitting the Tines
Once you have raked the lawn in one direction rake
again at right angles to the previous direction. (L)
• For total control of moss, use moss killer in early
spring a couple of weeks prior to using the lawnrake
• To gently remove particularly heavy areas of moss and
thatch you may have to rake over the area several times.
• For best results use your lawnrake regularly particu-
larly at the beginning of the season to encourage good
growth and at the end of the season to prepare the
lawn for winter. The lawn should be raked in autumn
leaving some time for the lawn to thicken and recover
before winter.
• To maintain the quality of your lawnrake it is recom-
mended that you clean it after use. Refer to the section
- Caring for your Product
N
Collection Box Full (M)
1. As the collection box fills up, grass will be clearly visi-
ble through the window in the lid (M).
2. When the window is full it is time to empty the collec-
tion box.
Emptying the Collection Box
1. Lift the collection box at the front and the rear handles (N)
2. Tilt the collection box upside down to release the col-
lection box flap (P)
3. Empty into your compost or garden waste bin.
4. Ensure collection box flap is fitted correctly before refit-
ting the collection box
R
Removing and Fitting the Tines
1. Ensure plug is removed from power supply
2. Turn the lawn rake upside down to access the tines
3. Remove the screw from the central disc on the set of
tines you wish to replace (Q)
4. Rotate the central disc to unlock the tines (R)
5. Remove the existing tine and replace with
a new one (S)
6. There are 2 types of tine; a left and a right. When re-
placing a worn tine of one type you should replace it
with a new tine of the same type.
7. Fitting is reversal of removal.
Advertisement
Table of Contents
