ALLEN & HEATH GL4000 User Manual page 35

34
S T
CROLL HROUGH THE
The 128 patches are numbered 0 to 127 . Before 0 there
is a special patch called ALL . This is described later.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
Press or to increment or decrement to the required
patch number.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
Hold down or
The ACTIVE PATCH dot will indicate the status of the
current console mutes against the selected patch number.
See the section on PATCH DISPLAY.
S
M P
TORE
A UTE
Operate the mutes to set up the console as required.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
Scroll or to select the required patch
Press STORE
The patch is overwritten with the console setting.
P
M
REVIEW
A UTE
Press PREVIEW
The green LED will start flashing.
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
Scroll or to select the required patch
The green SAFE/PREVIEW LEDs below the MUTE
switches will indicate which channels are muted in the
patch.
In preview mode no changes are made to the current
mute settings, and the channels can be muted in the
normal way.
To preview another patch simply scroll
Press PREVIEW again to exit preview mode.
R
M
ECALL
A UTE
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
Scroll or to select the required patch
Press RECALL
The console mutes are overwritten with the contents
of the selected patch.
Channels made 'safe' are not affected.
Active mute groups are not affected.
P N
ATCH UMBERS
for fast scrolling to the required number.
ATCH
P
ATCH
∧ ∧ ∧ ∧ ∧
P
ATCH
∨ ∨ ∨ ∨ ∨
or