Front Wheel/Front Suspension; Preparatory Data; Fault Diagnosis - Generic TR 125 Service Manual

III Front Wheel/Front Suspension

Preparatory data-----------------3.1

Fault diagnosis------------------3.2

Front wheel----------------------3.3
Control assembly---------------3.4
Front fork assembly------------3.5
3.1 Preparatory Data
Precautions on operation
Before removing the front wheel, lift and support the bottom of motorcycle with a jack or other available
device. The front wheel is off the ground. Take care not to rotate the wheel reversely.
Attention: Please do not let oil contaminate braking shoe.
Basic data of the motorcycle as a whole
Measuring position
Front wheel shaft
Front wheel
Tightening torque
Direction handle fixed screw
Front axle
3.2 Fault diagnosis
3.2.1 Direction handle moves hard
Direction handle is out of order or damaged
Bearing failure of direction handle
Faucet bearing rating nut is too tight
Tire pressure is not enough
Item
Curvature
Longitudinal
Wheel shimmy
Transversal
22-29 N·m
37-44 N·m
Standard value(mm) Service Limit(mm)
Within 1.0
Tools
Bearing disassembly pole
- 45 -
0.2
2.0
2.0