Listen To Radio; Switch To Radio Mode; Set Up; Tune To A Radio Station - Philips CED1800BT User Manual

6 Listen to radio

Switch to radio mode

switches to radio mode automatically.
To switch the source back to radio afterwards,
tap [Radio] on the home menu.
» The interface for radio is displayed.

Set up

Before you search for radio stations, make prior
setup.
Tap to display the setup menus.
Select a radio range
1
Tap [Radio Range].
2
Tap [Distance] or [Local] to select a tuner
sensitivity.
[Distance]: Stations with strong and
weak signals can be tuned to.
[Local]: Only stations with strong
signals can be tuned to.
Enable the RDS feature
Note
RDS feature is enabled by default.
Only after the RDS feature is enabled, the option of
[PTY list] is displayed.
Tap [RDS Off] to enable the RDS feature.
» The option of [PTY list] is displayed.
To disable the RDS feature, tap [RDS
On].

Tune to a radio station

1
Tap FM or AM to select a band.
FM bands: FM1, FM2, FM3
AM bands: AM1, AM2
2
Tap or repeatedly until the frequency
of target radio station is displayed.
To tune to a radio station automatically,
tap and hold
frequency digits start change.
Tip
You can also press BAND on the remote control
repeatedly to select a band.
or until the
EN 17