Initial Setup And Configuration - Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual

Coral SeaBeam Installation and Configuration Manual for Coral Sea Softswitch

Initial Setup and Configuration

................................................................................................................
To configure Coral SeaBeam for the first time:
After installing Coral SeaBeam, you must set up and enable at least one (default) SIP
account.
1
If Coral SeaBeam is not already running, double-click the Coral SeaBeam
desktop icon .
Tip:
You can also follow the following path to run Coral SeaBeam:
Programs Tadiran
>
2
If this is the first time you are installing Coral SeaBeam on this computer, you
are prompted to enter the license key, as provided by your system
administrator (see page
3
Enter the license key, and then click OK.
4
If you entered a valid license key, the Coral SeaBeam call display appears with
the following messages:
Initializing
Discovering network
Awaiting proxy login information
Tadiran Coral SeaBeam
>
9).
Start
>
Coral SeaBeam Installation 17