Setting The Rec (Recording) Timer - JVC CA-MXKC2 Instructions Manual

Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the ¢ or 4 button to select the preset station
number, then press the SET/DISPLAY button.
When selecting CD :
Press the ¢ or 4 button to select the disc number, then
press the SET/DISPLAY button.
Each time you press the button the disc number changes as fol-
lows:
DISC 1 = DISC 2 = DISC 3 = (back to the beginning)
When selecting TAPE:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
To allow this, the equipment should have the timer function.
5
Setting the volume level.
Press the ¢ or 4 button to select the volume level.
MIN, 1-26, or MAX: When the timer is turned on, the Volume
will be automatically faded into the selected volume level.
❏ When the volume level is set to MIN, no sound comes out of the
speakers.
6
Press the SET/DISPLAY button.
The timer setting is completed, the display returns to the dis-
play before you set the Timer.
7
Press the STANDBY/ON button to turn
off the System if neccessary.
The Timer indicator ( ) and "DAILY" indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, and the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) blinks during timer operation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator (
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
1
2
To activate the cancelled Daily Timer:
1
2
• If the System is unplugged, or a power failure occurs,
Setting the REC (Recording)
Timer
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
• You can set the REC Timer whether the System is on or
• Perform each setting within approx. 8 seconds. Other-
) and "DAILY" indica-
• If you have made a mistake while setting the timer, press
Press the CLOCK TIMER button on the Unit
repeatedly until the "DAILY" appears on the
display.
The "DAILY" indicator blinks on the dispaly.
Press the CANCEL/DEMO button on the Unit.
"OFF" appears and both the Timer indicator (
"DAILY" indicator go out.
Press the CLOCK TIMER button on the Unit
repeatedly until the "DAILY" appears on the
display.
The "DAILY" indicator blinks and the Timer indicator (
lights up on the dispaly.
Press the SET/DISPLAY button on the Unit.
"ON" appears on the display. The Timer indicator (
the "DAILY" indicator remain lit, and the display returns to
the original display.
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
off.
wise, setting will be cleared and the procedure must be
repeated from the beginning.
the CANCEL/DEMO button on the Unit. However, this
does not always cancel the current setting. If the CAN-
CEL/DEMO button does not work, press the CLOCK TIM-
ER button on the Unit repeatedly until the display returns
to the original display, and start from the first step.
Using the Timers
) and the
)
) and
22