Tape Operations; Listening To A Tape - JVC KS-FX850R Instructions Manual

Listening to a tape

1
2
• When one side of the tape reaches its end during play, the other side of the tape
automatically starts playing. (Auto Reverse)
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE 2 3 turns on the
unit and starts tape play automatically.
3
TAPE
™ £
To play back tapes recorded with the Dolby B NR
Press the MO RND
The indicator lights up, and "DOLBY B" appears on the display for several seconds. To
cancel the Dolby B NR, press the same button again.
* Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
"DOLBY" and the double-D symbol
Corporation.

TAPE OPERATIONS

1. Insert a cassette into the cassette
compartment.
The unit turns on and tape play starts automatically.
2. Close the control panel by hand.
Select the tape direction.
Each time you press the button, the tape direction changes
alternately – forward (
button to set the Dolby B NR* system as required in step 2 above.
are trademarks of Dolby Laboratories Licensing
Open the control panel.
) and reverse (
1
MO RND
3
).
17