Using The Sound Control Memory; Selecting And Storing The Sound Modes - JVC KS-FX850R Instructions Manual

Using the Sound Control Memory

You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored for each of the following sources —
FM1, FM2, FM3, AM, tape, and external components.
• If you do not want to store the sound mode separately for each playback source, but want to
use the same sound mode for all the sources, see "Canceling Advanced SCM" on page 28.
SCM
Indication
SCM OFF
BEAT
SOFT
POP
22
SCM
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
SCM OFF
• If the "Link" indicator is lit on the display (with "SCM LINK" set to "LINK
ON"—see page 28), the selected sound mode can be stored in memory
for the current source, and the effect applies to the current source.
• If the "Link" indicator is NOT lit on the display (with "SCM LINK" set to
"LINK OFF"), the selected sound mode effect applies to any source.
For:
(Flat sound)
Rock or disco music
Quiet background music
Light music
FM/AM CD
CD
-CH
BEAT SOFT
Preset values
Bass Treble
00 00
+02 00
+01 –03
+04 +01
"Link" indicator
POP
Loudness
On
On
Off
Off