Advertisement
Quick Links
50 Winter Crt.
--INSTALLATION INSTRUCTIONS—
Thank you for choosing a BREEZAIRE cooling unit. We believe our products are the
best on the market and will provide many years of trouble-free service.
Please take a few minutes and read the entire instruction booklet before beginning the installation.
Before removing the cooling unit from the box, please inspect for damage which
might have occurred during shipping. If damage is found, notify the shipper
immediately and file a claim. BREEZAIRE is not responsible for any damages
___________________.
MODEL
INSTALLED BY_____________________________. DATE____________________.
BREEZAIRE Products Company - 8610 Production Avenue - San Diego, CA USA 92121 - (858) 566-7465
Whitby, ON. L1N-8Y1
www.winecellarcreations.com
WKS 2200 SERIES
during shipping.
SERIAL NUMBER
(905)-666-0200
Fax (905)-665-1848
__________________.
Advertisement
Related Manuals for Breezaire WKS-2200 Series
Summary of Contents for Breezaire WKS-2200 Series
-
Page 1: Installation Instructions
If damage is found, notify the shipper immediately and file a claim. BREEZAIRE is not responsible for any damages during shipping. ___________________. __________________. MODEL SERIAL NUMBER INSTALLED BY_____________________________. DATE____________________. BREEZAIRE Products Company - 8610 Production Avenue - San Diego, CA USA 92121 - (858) 566-7465... -
Page 2: Enclosure Construction
Proper installation is critical to the performance, reliability and longevity of the system. For this reason, BREEZAIRE can only warrant the quality of the WKS components. The installation and proper operation must be warranted by the installer. Before installation is to begin, the purchaser and installer should carefully read the enclosed Limited Warranty. -
Page 3: Installation
INSTALLATION BREEZAIRE recommends the use of a licensed refrigeration technician to install the WKS2200. Installation of the unit's line set through a fire rated wall must be done in accordance with your local building inspector and building codes. The unit must be installed in the upright position and are not designed to have duct systems attached to either unit. -
Page 4: Condensing Unit
ENCLOSURE PROBLEMS BREEZAIRE is extremely proud of the quality and reliability of its products. Experience has shown that of the small number of problems encountered, the large majority are due to improper unit selection or enclosure construction. Should the cooling system be suspected of malfunctioning, check the temperature of the air being exhausted from the condenser's exhaust grille. - Page 5 In some cases, improper placement or installation may cause the unit's performance to be degraded. The condensing unit must have a constant supply of fresh air, less than 90 o F. If the condensing unit is located in a confined area with poor ventilation, the unit will not be able to reject the heat it is removing from the enclosure and a malfunctioning unit will be suspected.
-
Page 6: Limitation Of Implied Warranty
How to obtain warranty service: This warranty may be enforced only by the original retail customer BREEZAIRE may require you to provide the original bill of sale and is not transferable. or receipt as proof of purchase in order to obtain warranty service.