Table of Contents
Advertisement
Memory Card and
Battery Voltage Graphs
To the right of the Camera Mode icon
Memory Card and Battery Voltage.
The Memory Card bar graph shows the SD Memory Card
capacity level from 0% to 100%. 0% indicates there are NO
pictures on the card and 100% indicates the card is FULL. At
100% the word FULL will appear below the 100% sign. The word
NO Card, located below the 0% sign, indicates there is No SD
Card in the camera and the Memory Card header will also flash.
NOTE: There is NO onboard memory so without an SD Memory
Card the camera will not store pictures. (SD Memory Cards will
hold around 930 pictures per Gigabyte of Memory. 1 GB = 930
pictures, 2 GB = 1860 pictures and so on.)
The Battery Voltage bar graph shows the current status of the
batteries. The camera will take pictures down to around 3.6 volts.
At 3.6 volts the Battery Voltage header will start flashing
indicating it is time to change batteries.
NOTE: When you replace the batteries you need to Check the
TIME and DATE.
12
are 2 bar graphs,
12
12
Advertisement
Table of Contents
