Table of Contents
Advertisement
Aim Mode & Walk Test
Aim Mode activates the laser which is used to mark the center
of the picture and the center of the motion detection zone. With
the camera in Aim Mode attach the camera to a tree, fence post
etc. At 20 feet from the camera set the height of the laser at the
center mass of the object you are trying to take a picture of. The
laser also acts as a Walk-Test. Once the height is set, if you walk
from left-to-right or right-to-left the laser will flash indicating the
camera is seeing motion at that given distance.
NOTE: When the laser is turned on it will come on in Eye Safe
Mode. It will start off dim and gradually, in 2 seconds, brighten
to full strength. The laser is Eye Safe at 1mW Max Power output
making it a Class II Laser product. DO NOT STARE INTO
BEAM !!!!
Press the
Camera Mode.
Mode button to move from Aim Mode to
10
10
10
Advertisement
Table of Contents
