Table of Contents
Advertisement
6
Set Delay
NOTE: Delay is the amount of time between each activated
picture. In single picture mode, Delay is the minimum time
between each picture. In Burst mode, Delay is the minimum
time between each Bust sequence. The Factory set Delay is 30
seconds.
Now, in the Delay Mode, the Minute header will be flashing.
The factory setting for Minute is 00, press the
Increase or
Decrease button to set Delay in minutes or press the
Select button to move to Second. To change the Second Delay
press the
Increase or
Decrease button to set Delay in
Seconds.
NOTE: The MINIMUM Delay in Seconds is 3 seconds. Once the
Delay Mode is set press the
Mode button to move to the next
Mode: Set Burst.
6 6
Advertisement
Table of Contents
