Table of Contents
Advertisement
5. Installation instructions
5.1 Outdoor unit
"Edging" for protection of electric wires from an opening edge.
Selection of the place of installation
Select the place of installation satisfying the following conditions and,
at the same time, obtain a consent from the client or user.
Place where air circulates.
Place free from heat radiation from other heat sources.
Place where drain water may be discharged.
Place where noise and hot air may not disturb the neighborhood.
Place where there is not heavy snowfall in the winter time.
Place where obstacles do not exist near the air inlet and air outlet .
Place where the air outlet may not be exposed to a strong wind.
Place surrounded at four sides are not suitable for installation. A 1m or more of overhead space is
needed for the unit.
Mount guide-louvers to place where short-circuit is a possibility.
When installing several units, secure sufficient suction space to avoid short circuiting.
(1) Open space requirement around the unit
the
16
Commercial Air Conditioner
Model: HBU-18CF03
HDU-42CF03/H HPU-42HF03
Note :
(1). Fix the parts with screws
(2). Don't intake the strong wind directly to
outlet air-flow hole.
(3). A one meter distance should be kept
from the unit top
(4). Don't block the surroundings of the
unit with sundries
Hide quick links:
Advertisement
Table of Contents
