Honeywell OWA 100 User Manual page 29

OWA Status
HART WORKING
NO KEY
DISCOVER
SECURING
JOINING
NOT CONNECTED
JOINED
Rev. 2
July 2011
Definition
OWA is communicating with
HART Device.
OWA does not have a Key
OWA has not made a
connection to a FDAP and is in
the Discovery Mode (searching
for a connection to a FDAP).
OWA will automatically enter a
power saving mode if it cannot
make a connection and will retry
later.
OWA has made a connection
with the network and is
validating its key.
OWA is negotiating the
parameters of its interface to the
network.
OWA is in between Discovery
attempts.
OWA has made a secure
connection with the network and
has entered normal operation
mode.
OWA 100 Adapter User Manual
What to do
Normal Operation.
Transmit a key to the OWA. See page 22.
Wait for a connection. If OWA does not
make a connection within five minutes, see
NOT CONNECTED in this table.
Wait for a connection. If OWA does not
make a connection within five minutes, see
NOT CONNECTED in this table.
Wait for a connection. If OWA does not
make a connection within five minutes, see
NOT CONNECTED in this table.
If OWA does not make a connection to the
wireless network within five minutes, do the
following:
 Check that the Key is correct for the
network that you are trying to join.
 Check that the FDAP(s) in the local
area are turned on and are already a
secure part of the network.
 Check that FDAP(s) are within radio
range of OWA.
 Check if WDM is active and if the
OWA shows up in the list of devices.
Normal Operation.
4. Operation
4.1. Overview
19