Assigning Titles To Stations; When An Fm Stereo Broadcast Is Hard To Receive; Tuning In To Stations With Sufficient Signal Strength - JVC KD-NXD505J Instructions Manual

Assigning titles to stations

You can assign a title to up to 30 radio stations.
1
Tune in to the station you want
to assign a title to.
2
3
AV Menu
]Title Entry
- Input Station Name -
4
Assign the title.
• Inputting characters ☞ [105]
• You can use up to 16 characters.
5
Select Store.
If [Name Full] appears
If you have assigned titles to 30 stations, you
need to delete some titles to name new stations.
3
After step above...
1
2
Select the titles to delete.
• Checkbox operations ☞ [105]
3
Delete the selected titles.
[Hold]
54
Del More Store
Title Delete 1/7
Select All
Station name 1
Station name 2
Station name 3
Station name 4
Delete Check
When an FM stereo broadcast is hard
to receive
1
2
AV Menu
]Mode
]Mono
]On
3
lights up. Reception improves, but stereo
effect will be lost.
To restore stereo effect, select Off in step
Tuning in to stations with sufficient
signal strength
This function works only for FM bands.
Once you have activated this function (selected
Local), it always works when searching for FM
stations.
1
2
AV Menu
]Mode
]DX/Local
]Local
3
lights up. Only stations with sufficient
signal strength will be detected.
To tune in to all receivable stations again,
2
select DX in step
.
2
.