NETGEAR WNR500 User Manual page 47

1. Select Guest Network from the Setup menu. The Guest Network Settings screen appears
Figure 2-14
2. Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
– Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its name
(SSID) to all Wireless Stations. Stations can adopt the correct SSID for connections to this
Access Point.
– Allow Guest to access MY Local Network – If selected any user who connects to this
SSID can access local networks associated with the router like users in the primary SSID.
3. Give the wireless network a name.
The name is case-sensitive and can be up to 32 characters. The same name must be assigned to
all wireless devices in your network. NETGEAR recommends that you change the name to a
different value.
4. Select a Security option from the list.
5. Click Apply to save your selections.
Safeguarding Your Network
N-150 2-Port Wireless Router WNR500 User Manual
v1.0, November 2011
2-22