Configuring The Wps Settings - NETGEAR WNR500 User Manual

6. Click Next. The following screen displays, and the Smart Wizard initiates the wireless
connection:
Figure 2-9

Configuring the WPS Settings

1. Log in to the router as described in
2. Select Advanced Wireless Settings under Advanced in the main menu REPLACE PIC.
Figure 2-10
These options are available under WPS Settings:
• Router's PIN. The PIN is displayed so that you can use it to configure the router through
WPS (Wi-Fi Protected Setup). It is also displayed on the router's label.
• Enable WPS. ADD DESCRIPTION.
• Disable Router's PIN. If the router's PIN is disabled, you cannot configure the router's
wireless settings with WPS. However, if your settings are already configured, you can still
add WPS-enabled wireless clients. The router might disable the PIN if it detects
suspicious attempts to break into your wireless settings; this can happen if the check box is
selected. You can enable the PIN by clearing the check box and clicking Apply.
Safeguarding Your Network
N-150 2-Port Wireless Router WNR500 User Manual
"Logging In To Your Wireless Router" on page 1-1.
v1.0, November 2011
2-16