NETGEAR WNR500 User Manual page 39

3. Select the Push Button setup method.
Figure 2-6
4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client
screen displays.
Figure 2-7
The green light on the WNR500 router begins to blink in a regular pattern. While the
button light is blinking, you have 2 minutes to enable WPS on the device you are trying to
connect to the router.
5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The WNR500 router's green
conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the connection
is not established, no WPS security settings will be specified in the WNR500 router.
Safeguarding Your Network
N-150 2-Port Wireless Router WNR500 User Manual
light ceases blinking and remains on when one of these
v1.0, November 2011
2-14