The manufacturer’s policy is one of continuous improvement and we reserve the right to make changes to product specifications at our discretion and without prior notice. E&OE. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 3 of 28...
If you are an authorised engineer, details of access level 3 can be found in the panel’s separate Engineering manual. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 4 of 28...
Test Lit yellow when the panel is in walk test mode. This LED does NOT illuminate for any other test condition XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 6 of 28...
Page 7
Keyswitch control (if fitted) Turning the keyswitch to the armed position gives the user instant access to access level 2 (authorised user level). XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 7 of 28...
Whilst calibrating, the display will list the ID code of the device being calibrated, i.e. “L:1 D:154” and the system will not return to normal until the process is complete. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 8 of 28...
Details of which outputs have delays running can be viewed by pressing the more information button. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 9 of 28...
In effect, the 1st-Stage delay on a zone set up for investigation comprises two delays - the initial recognition period (where the user is expected to acknowledge the delay) followed by the investigation period itself. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 10 of 28...
This function is only available if there are active fire conditions on the system. If available, press the accept button once and a window similar to the one below will appear:- Last Zone: 1:North Stairs :Fire! 1 Zone XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 12 of 28...
Total Alarms = 12 Alarms since 01/01/05 = 7 To return to the main access level 1 menu press the escape or accept button. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 13 of 28...
Note that the panel’s INVESTIGATE button is only active if an engineer has programmed one or more zones to operate with a 1st-stage investigation delay period (see page 10 for detailed information on this feature). XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 14 of 28...
A short confirmation message will confirm the change has been made before the display returns to the main access level 2 menu. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 15 of 28...
Alternatively, to return to the previous menu press the escape button. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 17 of 28...
Page 18
Alternatively, to return to the previous menu press the escape button. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 18 of 28...
WILL NOT affect the panel’s operation, i.e. access to the panel’s authorised user menu will still be available via the panel’s keyswitch. XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 19 of 28...
We recommend any additional information the user needs to be aware of is detailed below:- _________________________________________________________________________________________________________ _________________________________________________________________________________________________________ _________________________________________________________________________________________________________ _________________________________________________________________________________________________________ _________________________________________________________________________________________________________ Completed by ____________________________________ of ______________________________________ on ____ / ____ / ____ XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 20 of 28...
THE NORMAL MAXIMUM ATTENDANCE TIME FOR A MAINTENANCE TECHNICIAN IS: _______________ EXPENDABLE COMPONENT REPLACEMENT PERIODS (LIST):- XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 21 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
Page 22
EVENT e.g. test, fire alarm signal, fault ZONE DEVICE ACTION REQUIRED COMPLETED INITIALS XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 22 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
Page 23
EVENT e.g. test, fire alarm signal, fault ZONE DEVICE ACTION REQUIRED COMPLETED INITIALS XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 23 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
Page 24
EVENT e.g. test, fire alarm signal, fault ZONE DEVICE ACTION REQUIRED COMPLETED INITIALS XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 24 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
Page 25
EVENT e.g. test, fire alarm signal, fault ZONE DEVICE ACTION REQUIRED COMPLETED INITIALS XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 25 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
TIME REASONS FOR WORK WORK CARRIED OUT REQUIRED (WHERE APPLICABLE) (WHERE APPLICABLE) XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 26 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...
Unless supplied by others, the “as fitted” drawings have been supplied to the person responsible for commissioning the system (see 36.2m) of BS5839-1: 2002: ____________________________________ XFP USER MANUAL & LOG BOOK • Approved Document No. DFU2000501 Rev 2 • Page 27 of 28 CFP USER MANUAL • Approved Document No. DFU7001000 Rev 4...