GE ZET1 Installation Instructions Manual page 4

Cutout for Single Built-In Oven
A1
Allow 11/16"
ALLOW 11/16" FOR
(1.75 cm) for
OVERLAP OF THE
overlap of oven
OVEN OVER SIDE
over side edges
EDGES OF CUTOUT
of cutout
21"
(53.3 cm)
21"
Allow a minimum
ALLOW A MINIMUM
of 21" (53.3 cm) for
clearance to adjacent
corners, drawers,
DRAWERS, WALLS ETC.
walls, etc. when
door is open
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For single
ovens, the runners and braces must
support 200 lbs. (90 kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Side by Side Installations
Install two wall ovens in separate cutouts.
Allow 2" (5.1 cm) min. between cutouts.
2" (5.1 cm)
Cutout –
Min.
Observe all
dimensions
and
requirements.
Installation Instructions
Cutout Width
CUTOUT
WIDTH
28 1/2" Min.
28 1/2" MIN.
28 5/8" Max.
28 5/8" MAX.
(72.4 to 72.7 cm)
Opening
Between
Cutout
THE OPENING Inside Walls
Height
BETWEEN INSIDE
Must Be CUTOUT
27 1/4" Min.
WALLS MUST
HEIGHT
At Least
BE AT LEAST 27 5/16" Max.
27 1/4" MIN.
28 1/2"
28 1/2"WIDE
(69.2 to 69.4 cm)
27 5/16" MAX.
(72.4 cm)
Wide
RECOMMENDED
Recommended
CUTOUT
cutout location
LOCATION
Allow 1" (2.5 cm)
ALLOW 1" FOR
32 1/2" (82.6 cm)
32 1/2"
OVERLAP
minimum for
from floor
FROM THE
ON OVEN TOP
overlap of oven
FLOOR
AND BOTTOM
top and 1 1 ⁄
"
OF CUTOUT
4
(3.2 cm) overlap
of oven bottom
of cutout
CABINET
Cabinet WIDTH
30"
Width
30" (76.2 cm)
Cutout –
Observe all
dimensions
and
requirements.
9 1/2"
(24.1 cm)
Junction Box
Max.
5"
Location
(junction box
may be
located in
JUNCTION BOX adjacent
LOCATION
cabinet)
22" (55.9 cm) Min. 22" TO
BOTTOM OF
to Bottom of
JUNCTION BOX
Junction Box
Suitable
Bracing
to Support
Runners
The solid bottom or runners must be level
with the bottom of the cutout, or the bottom
trim may not install correctly and then
interfere with the door opening.
This oven is not approved for
stackable installation.
4
Cabinet Width 30" (76.2 cm)
Recommended
Cutout Location
from Floor 32 1/2" (82.6 cm)
Cutout Depth 23 1/2" (59.7 cm) Min.
Cutout Width 28 1/2" (72.4 cm) Min.
28 5/8" (72.7 cm) Max.
Cutout Height 27 1/4" (69.2 cm) Min.
27 5/16" (69.4 cm) Max.
NOTE: If the cabinet does
not have a front frame and
the sides are less than 3/4"
(1.9 cm) thick, shim both
sides equally to establish
the cutout width.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
(54.9 cm)
OF CABINET
Over Centerline
of Cabinet
Install a
2" x 4" or
EQUIVALENT
solid bottom
RUNNERS
or 2" x 4"
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout