When You Use Jvc Fm Modulator Ks-If200; Selecting The Rf Signals To The Receiver - JVC KV-MH6500 Instructions Manual

4
Play back the external component.
To operate the external components, refer to the manuals for the connected
components.
5
Select the external component and adjust the volume on the car
receiver.
To check the current input source
On the monitor: Press the Power button (
On the remote: Press the MODE button once.
The on-screen display appears for about 5 seconds.
To turn off the power
On the monitor: Press and hold the Power button (
On the remote: Press the Power On/Standby button (

When you use JVC FM modulator KS-IF200

Selecting the RF signals to the receiver

You can listen to playback sounds from the external component through the receiver even if
it is equipped with no line input.
• Refer also to the instructions of KS-IF200.
When KV-C10 is connected:
Press the RF button on the remote controller.
Each time you press the button, "RF ON" and "RF OFF" alternate and the sounds you hear
through the car speakers change accordingly.
RF ON : Select to listen to the sound of the external component.
RF OFF : Select to listen to the radio (through the receiver).
) once.
Monitor
).
) .
Monitor
MODE
Remote
Remote
9