Abarth Punto Evo Owner's Handbook Manual page 31

Trip time
KNOWING
Time elapsed since the start of the new journey.
YOUR VEHICLE
IMPORTANT In the absence of information, Trip
Computer values are displayed with "----". When
normal operating condition is restored, calculation of
SAFETY
different units will restart regularly. No values displayed
before the failure will be reset nor will a new mission
be started.
STARTING
TRIP control button fig. 19
AND DRIVING
The TRIP button is located on the right hand lever.
With the ignition key turned to MAR, this button allows
WARNING LIGHTS you to view the previously described parameters and
AND MESSAGES reset them to begin a new mission:
– short press to display the different values;
– long press to reset and start a new mission.
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
fig. 19
30
New mission
This begins after a reset:
– "manual" resetting by the user, by pressing the
relevant button;
– "automatic" resetting, when the distance travelled
reaches 99,999.9 km or when the journey time reaches
99.59 (99 hours and 59 minutes);
– disconnection/reconnection of the battery.
IMPORTANT The reset operation when "Trip A"
details are being displayed resets the information
associated with this function only.
IMPORTANT The reset operation when "Trip B"
details are being displayed resets the information
associated with this function only.
Start of journey procedure
With the ignition key in the MAR position, reset by
pressing the TRIP button and keeping it pressed for
more than 2 seconds.
Exit Trip
To exit from the Trip function: keep MENU ESC
pressed for over 2 seconds.
F0U018Ab