NUMBER PLATE LIGHTS
To change the bulb proceed as follows:
❒ act on the point shown by the arrow and remove
the lens unit A-fig. 150;
fig. 150
❒ change the bulb fig.151 by releasing it from the side
contacts and making sure that the new bulb is
correctly fastened between these contacts;
❒ refit the snap-fitted lens unit.
F0U152Ab
fig. 151
KNOWING
YOUR VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
F0U153Ab
167