Trip Computer - Abarth Punto Evo Owner's Handbook Manual

TRIP COMPUTER

General information
The Trip computer is used to display information on car
operation when the key is turned to MAR. This function
is made up of two separate trips called "Trip A" and
"Trip B" which can monitor the car's "complete mission"
independently of each other. Both functions can be
zeroed
(reset - start of a new journey).
"Trip A" is used to display the figures relating to:
– Outside temperature
– Range
– Trip distance
– Average consumption
– Current consumption
– Average speed
– Trip time (driving time).
Trip B allows the display of the following parameters:
– Trip distance B
– Average consumption B
– Average speed B
– Trip time B (driving time).
N.B. "Trip B" may be disabled (see "Activating Trip B").
"Range" and "Instantaneous consumption" cannot be
reset.
Values displayed
Outside temperature
Indicates the temperature outside the vehicle passenger
compartment.
Range
This indicates the approximate distance that may be
travelled with the fuel remaining in the tank, assuming
that driving conditions do not change. The display will
show the reading
"----" when the following events take place:
– range value lower than 50 km (or 30 mi)
– car parked with engine running for a long period.
Distance travelled
This value shows the distance covered from the start of
the new journey.
Average consumption
This value shows the approximate average fuel
consumption from the start of the new journey.
Current consumption
This indicates the fuel consumption. The value is
constantly updated. The display will show "----" if the
car is parked with the engine running.
Average speed
This value shows the car's average speed as a function
of the overall time elapsed since the start of the new
mission.
KNOWING
YOUR VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
29