Basic Operations; Turning On The Power - JVC KS-LX200R Instructions Manual

BASIC OPERATIONS

Turning on the power

1
Turn on the power.
2
Select the source.
= FM = DAB tuner** = Tape*
= CD changer** = External component
= AM = (back to the beginning)
* If a cassette is not in the cassette compartment,
you cannot select tape as the source to play.
** Without connecting the CD changer and/or the
DAB tuner, you cannot select it as the source to
play.
To operate the tuner (FM or AM),
see pages 7 – 14.
To operate the tape, see pages 15 – 17.
To operate the CD changer,
see pages 27 – 28.
To operate the external component connected
to the LINE IN plugs, see page 29.
To operate the DAB tuner,
see pages 30 – 33.
6
1
The display illuminates and
the control panel comes out.
Each time you press the
button, the source changes
as follows:
3 2
3
Adjust the volume.
Press + to increase the volume.
Press – to decrease the volume.
Volume level meter
4
Adjust the sound as you want (see
page 18.)
To drop the volume in a moment
Press MODE ATT for more than 1 second while
listening to any source. "ATT" starts flashing on the
display, and the volume level will drop in a moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold 0 OFF until "SEE YOU" appears
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 21.