8. CUBIC DUCT
1) insert screw driver into the gap to pull out
* Be careful not to break the hook.
9. SIDE LOUVER
1) Pull louver forward slowly.
* Be careful not to damage sealing
sponge stripes
10. FRONT CONTROL PANEL
1) Place any sheet right of panel to protect surface
of it.
2) Insert small screw driver into the gap to lift panel
windows up.
3) Insert another driver into the gap and move it left
loosen 2 hooks.
4) Pull window out smoothly.
loosen 2 hooks.
DISASSSEMBLY AND ASSEMBLY
35