Using The Sound Control Memory; Selecting And Storing The Sound Modes - JVC KS-FX470 Instructions Manual

Using the Sound Control Memory

You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored each of the following sources — FM1,
FM2, FM3, AM, tape, CD-changer and external components.
• If you do not want to store the sound mode separately for each playback source, but
want to use the same sound mode for all the sources, see "Canceling Advanced SCM"
on page 21.
Indication
SCM OFF
BEAT
SOFT
POP
16
"SCM" indicator
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows:
• When "SCM LINK" is set to "LINK ON", the selected sound mode can
be stored in memory for the current source and the effect applies only
to the current source. Each time you change the playback source, the
SCM indicator flashes on the display.
• When "SCM LINK" is set to "LINK OFF", the selected sound mode
effect applies to any source.
For:
(Flat sound)
Rock or disco music
Quiet background music
Light music
SCM
Preset values
Bass Treble
00 00
+02 00
+01 –03
+04 +01
Loudness
On
On
Off
Off