Manual preset
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM 1 – 3, AM) you
want to store stations into (in this
example, FM 1).
Each time you press the button, the FM band
changes as follows:
AM
2
Tune in to a station of 88.3 MHz.
To tune in to stations of higher
frequencies
To tune in to stations of lower
frequencies
3
Press and hold the button (in this
example, 1) for more than 2 seconds.
Preset number "P1" flashes for a while.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.
FM1
FM2
FM3
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see "Storing stations in
memory" on pages 6 – 7.
1
Select the band (FM1 – 3, AM).
AM
2
Select the number (1 – 6) for the preset
station you want.
7
8
FM1
FM2
FM3
9
10
11
12
7