Chapter 2.0: Hardware Installation & Setup; Connectors And Indicators - Corega COR-WLBAR-AA User Manual

Chapter 2.0 Hardware Installation and Setup

2-1 Connectors and Indicators

The front and rear panels of the router are shown in Figure 2.
Rear Panel Connectors
• Antenna Provides data transmission and reception for wireless devices. Please ensure that the Antenna is facing upwards.
• Reset Pressing this button for 3 seconds will reset the unit back to factory defaults.
• ADSL This is the WAN connection port to the telephone socket.
• LAN 1–4 Four LAN ports for local computers/printers.
• Power Inlet socket for external power adapter.
Front Panel Indicators
• Power 0ff - No power applied
Green - Power to the router
• Status Yellow - Glows when the router performs a self test, and diagnostics.
Off - When router is operating correctly.
• WLAN Enable/Activity Off - Wireless not enabled
Green - Wireless enabled
Flashing - Data activity on the wireless port
• 10/100 LAN Link/Activity Off - Port not active
Green - Port has valid connection
Flashing - Data activity on the port
• ADSL Link/Activity Off - ADSL line not connected
Green - ADSL connection is established and ready
Flashing - ADSL connection is being established
Power Status
100 10
1
2
LAN
3
4
ADSL Wireless
WLBAR-AA
Wireless, ADSL
Broadband
Access
Router
Figure 2. Front & Rear Panels.
ADSL
RESET
LAN1
LAN2
LAN3
LAN4
POWER
4