Table of Contents
Advertisement
Quick Links
Warranty
Corega International warrants product for two years from date of purchase
against defects in materials and workmanship. This warranty does not cover
any defects caused by accident, misuse, fair wear and tear, neglect, or an
attempt at repair. This warranty is offered as an additional benefit to the
consumer's statutory rights and does not affect these rights in any way.
Corega International shall not be held responsible for any special, incidental,
or consequential damages resulting from any breach of warranty, or under any
other legal theory, including but not limited to lost profit, downtime, damage to
data stored in or used with Corega International products.
Trademarks
Corega
TM
is a trademark of Corega Holdings KK., Japan.
Other trademarks, brand and product names are acknowledged as trademarks
of their respective holders. Information is subject to change without notice.
All rights reserved.
(GB) Warnings
ELECTRIC SHOCK HAZARD:
Install product in accordance with local and National Electrical Codes.
To de-energise equipment, disconnect the power cord.
(D) Warnhinweise
STROMSCHLAGGEFAHR:
Dieses Produkt muss entsprechend den örtlichen und nationalen
Elektrizitätsvorschriften installiert werden. Zum Abschalten der Ausrüstung
Stromkabel abziehen.
(I) Attenzione
RISCHIO DI SHOCK ELETTRICO:
Installare l'apparecchio in base alle normative elettriche locali e nazionali. Per
togliere l'alimentazione al dispositivo, scollegare il cavo relativo.
(E) Advertencias
PELIGRO DE ELECTROCUCIÓN:
Instale el producto de acuerdo con las recomendaciones de la
normativa sobre instalaciones eléctricas de su país. Para desactivar el equipo,
desconecte el cable de alimentación.
(F) Avertissements
RISQUE D'ÉLECTROCUTION:
Installez le produit conformément aux réglementations électriques nationales et
locales. Pour mettre l'équipement hors tension, débranchez le cordon
d'alimentation.
(FIN) Varoitukset
SÄHKÖISKUN VAARA:
Asenna tuote noudattaen paikallisia ja kansallisia säädöksia. Laitteen saa jännit-
teettömäksi vain irroittamalla sähköjohdon.
(RUS)
ОПАСНОСТЬ ПОРАЖЕНИЯ ЭЛЕКТРИЧЕСКИМ ТОКОМ:
Устанавливайте изделие в соответствии с местными и
национальными правилами по установке
электрооборудования. Для отключения питания
отключите шнур питания.
Предупреждение – это изделие класса A. В домашних
условиях это изделие может создавать радиопомехи. В
этом случае пользователю, возможно, понадобится
принять соответствующие меры.
617-10130/01
Advertisement
Table of Contents
Related Manuals for Corega COR-WLBAR-AA
Summary of Contents for Corega COR-WLBAR-AA
- Page 1 Warranty (GB) Warnings ELECTRIC SHOCK HAZARD: Corega International warrants product for two years from date of purchase against defects in materials and workmanship. This warranty does not cover Install product in accordance with local and National Electrical Codes. any defects caused by accident, misuse, fair wear and tear, neglect, or an To de-energise equipment, disconnect the power cord.
- Page 2 ADSL WIRELESS 802.11g 54MBPS ROUTER COR-WLBAR-AA & COR-WLBAR-AB ALL-IN-ONE-ROUTER HUBS • SWITCHES • ADAPTERS • WIRELESS LAN • USB • KVMs • MEDIA CONVERTERS • ROUTERS • ADSL...
-
Page 3: Table Of Contents
Table of Contents FCC STATEMENT CE DECLARATION OF CONFORMITY MANUFACTURER’S DISCLAIMER STATE CHAPTER 1.0: GETTING TO KNOW YOUR ADSL WIRELESS ROUTER FEATURES OF THE ADSL WIRELESS ROUTER CONTENTS OF THE ADSL WIRELESS ROUTER PACKAGE CHAPTER 2.0: HARDWARE INSTALLATION & SETUP CONNECTORS AND INDICATORS INSTALLATION CHAPTER 3.0: BASIC INSTALLATION &... -
Page 4: Fcc Statement
FCC Statement This device complies with Part 15 of FCC rule. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This ADSL Wireless Router has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 5: Chapter1.0 Getting To Know Your Adsl Wireless Router
Chapter1.0 Getting to know your ADSL Wireless Router 1-1 Features of the ADSL Wireless Router Congratulations on your purchase of this ADSL Wireless Router. The router provides the following benefits: • High Speed internet Access over ADSL (Up to 8Mbps internet downstream speed and 832Kbps upstream speed). •... -
Page 6: Chapter 2.0: Hardware Installation & Setup
Chapter 2.0 Hardware Installation and Setup 2-1 Connectors and Indicators The front and rear panels of the router are shown in Figure 2. Power Status ADSL RESET LAN1 LAN2 ADSL Wireless LAN3 LAN4 WLBAR-AA Wireless, ADSL Broadband Access POWER Router Figure 2. -
Page 7: Installation
• Web browser such as Microsoft Internet Explorer 4.0 or later. Note! If you are connecting via a wireless connection – the Access Point in the router is programmed with the following default parameters: SSID - corega WEP - disabled... -
Page 8: Chapter 3.0 Basic Installation & Setup
Depending on your ISP, some or all of these parameters need to be programmed into the router. Before attempting to configure the router, Corega suggest that you visit the support site of www.corega-international.com, and download a configuration file which may help you with your particular installation. -
Page 9: One
• SSID: (Service Set Identifier). SSID is the unique name shared among all clients and the router in a wireless network. The SSID must be identical for all wireless devices and must not exceed 32 characters. The default value for the SSID is ‘corega’. -
Page 10: Gateway Using Pppoe
VC Setting: • VPI: If you have uploaded a config file (see section 5.6 on page 39, this parameter will already be set. This is a value between 0-255 and is provided by your Internet Service Provider (ISP). • VCI: If you have uploaded a config file, this parameter will already be set. This is a value between 32-65535 and is provided by your Internet Service Provider (ISP). -
Page 11: Gateway Using Pppoa
3-1-2 Gateway using PPPoA Figure 7. Gateway using PPPoA • Login Name: Enter your ISP Username. • Password: Enter your ISP Password. • Connect-on-demand: Only enable this option if your ISP charges by the megabyte or by minutes (seconds) of line usage. Enabling this option will cause the router to connect to the ADSL line when there is a packet waiting to be transmitted. -
Page 12: Gateway Using Static Ip
3-1-4 Gateway using Static IP Figure 9. Gateway using Static IP Choose this setting according to the following conditions: 1. You want to employ NAT. NAT allows you to use single IP address as the external one to share internet access for all of your PCs, as well as protect them from outside intruders. -
Page 13: Modem Using Llc Encaps
3-1-6 Modem using LLC Encaps Figure 11. Modem Only Choose this setting according to the following conditions: 1. You want this device acting as an ADSL modem. 2. Your ISP uses LLC encapsulation. Your ISP may use DHCP to provide an IP address or to provide you with one or more IP addresses, as well as asking you to use PPPoA or PPPoE connection modes when you apply for the service. -
Page 14: Configure Wireless Security
3.2 Configure Wireless Security. From the One-Page-Setup screen, select the Configure option from under the wireless section. Figure 12. Configuring Wireless Security The default wireless security setting is “disabled”. This is to ensure that all wireless devices can initially connect to the router. It is recommended that you enable wireless security on the router. -
Page 15: Wpa-Psk Encryption
3-2-2 WPA-PSK Encryption WPA is a wireless security system with far greater protection than WEP. It avoids most of WEP’s vulnerabilities. WPA has significant advantages over WEP. The encryption key used to encrypt the data is different for every packet. This TKIP (Temporal Key Integrity Protocol) mechanism shares a starting key between devices. Each device then changes their encryption key for every packet. -
Page 16: Status
This is the physical MAC level address of the WAN (ADSL) port of the router. Wireless • Name (SSID) This is the SSID of the router. The default is “corega”. • Region This is selected from the One-Page-Setup. Different regions support different numbers of wireless channels. -
Page 17: Chapter 4.0 Advanced Configuration
Chapter 4.0 Advanced Configuration Most users will not need to change any advanced configuration on this router. This section is intended for users who are familiar with both wireless and routers. 4-1 DHCP Configuration A DHCP (Dynamic Host Configuration Protocol) Server can automatically assign IP Addresses to each computer in your network. Unless you already have one in your LAN, it is highly recommended that you set your router to act as a DHCP server. -
Page 18: Dmz Configuration
4-2 DMZ In computer networks, a DMZ (Demilitarized Zone) is a computer host or small network inserted as a “neutral zone” between a company’s private network and the outside public network. It prevents outside users from getting direct access to computers on the local LAN. The firewall protects computers on the local LAN from unauthorised access from computers on the ADSL WAN port or the Internet. -
Page 19: Firewall Rules
4-3 Firewall Rules This allows users to configure the Stateful Packet Inspection Firewall to protect the user from external hackers. The firewall is enabled as default to provide the user with the maximum protection. Most users should not have to make any changes to the firewall Figure 17. -
Page 20: Firewall Services
4-4 Firewall Services This section allows advanced users to create user defined services for use with the firewall. The following services are programmed as standard. Service TCP/UDP Ports 20:21 H.323 1720 HTTP HTTPS IDENT TCP/UDP 6667 NEWS 2049 NNTP RCMD REAL-AUDIO 7070 REXEC... -
Page 21: Internet Access Control
4-5 Internet Access Control Internet Access Control allows the network administrator the ability to allow computers on the local or wireless LANs access (or denial) to specify websites or server types. Figure 18. Internet Access Control Main Settings URL Filter: Select from one of the thee options. •... -
Page 22: Internet Access Control - Url Filter Settings
4-5-1 Internet Access Control - URL Filter Setting From the Internet Access Control screen, select the Configure URL Filter option. Figure 19. Internet Access Control - URL Filter To add a word string to be checked when filtering, enter the characters in the Add Filter String and then press Add. All current filters will be shown in the Current Filter Strings box. -
Page 23: Port Forwarding (Virtual Server) Settings
4-6 Port Forwarding (Virtual Server) Settings The Virtual Server Settings application allows up to a maximum of ten pre-defined public services and up to five user-defined services that can be accessed by external users over the internet. Service can be applications such as a Web, Email, FTP etc. Each service is provided by a dedicated network computer (server) configured with a fixed IP Address. -
Page 24: Ddns
4-7 Dynamic DNS (DDNS) “DDNS” is an acronym for Dynamic Domain Name Service. Whenever you set up the web servers, mail servers, or sometimes ftp servers, you need “Domain Name” to help internet users reach your servers easily. The internet actually runs on IP Addresses which are in numerical order, for example “66.37.215.53”. These IP Addresses identify the location of each device connected to the internet. -
Page 25: Special Applications
4-8 Special Applications This feature is for Internet applications which normally cannot work through the built-in firewall. If an Internet application does not work, you can try defining it here. You will need detailed information about the application from the provider of the service or application. Note that the terms "Incoming" and "Outgoing" refer to traffic from the client (PC) viewpoint. -
Page 26: Miscellaneous Options
4-9 Miscellaneous Options This section allows users to configure some Miscellaneous options in the router. Figure 23. Miscellaneous Options Internet • Respond to Ping: If this option is enabled, then the router will respond to a ping request on the LAN port. This option is sometimes useful when you want to test connections across the Internet. -
Page 27: Routing
4-10 Routing The Routing feature allows the router to exchange routing information with other routers in the network. Figure 24. Routing Dynamic Routing (RIP) • RIP Direction From the drop-down list, select one of the routing types: “None” “In Only” “Out Only”... -
Page 28: Time Schedule
4-11 Time Schedule This feature allows you to limit connection availability according to a nominated time of day schedule. Up to two active sessions are allow on each day of the week. Figure 25. Time Schedule Schedule • Sessions: For each day of the week, the user can define up to two time periods when the schedule will be active. The schedule is used in conjunction with Internet Access Control as described in section 4-5. -
Page 29: Wireless Access Control
4-12 Wireless Access Control Wireless Access Control provides an additional level of security allowing the network administrator to block unauthorised wireless clients from connecting to the router. Figure 26. Wireless Access Control Station Access • ALL Wireless Stations: If this is selected, then all wireless clients can connect to the router without any additional security. •... -
Page 30: Vpn Configuration
4-13 Virtual Private Network (VPN) Settings A Virtual Private Network (VPN) allows users to use the internet to make the equivalent of a direct connection (private network) between two offices. Private networks should be extremely secure, therefore when using the internet to make a VPN, data encryption must be used to ensure a high level of data security. Figure 28. -
Page 31: Vpn - Add Manual Policy
4-13-1 Add Manual Policy Figure 29. Adding a Manual VPN General • Policy Name: The router allows the user to set up multiple VPN configurations. Each configuration has a unique name. Note! The Policy Name set here does not always have to match the name used at the other end of the Tunnel. However, certain VPN applications require a Tunnel to have the same name at both ends of the Tunnel. - Page 32 Remote LAN • IP Address: This allows the Remote LAN VPN to be directed to either - Single PC Use this when the remote device is a single PC using Dynamic IP and with no LAN. • IP Address Leave blank. •...
-
Page 33: Vpn - Add Auto Policy
4-13-2 Add Auto Policy Figure 30. Adding an Auto VPN General • Policy Name: The router allows the user to set up multiple VPN configurations. Each configuration has a unique name. Note! The Policy Name set here does not always have to match the name used at the other end of the Tunnel. However, certain VPN applications require a Tunnel to have the same name at both ends of the Tunnel. - Page 34 Remote LAN • IP Address: This allows the Remote LAN VPN to be directed to either - Single PC Use this when the remote device is a single PC using Dynamic IP and with no LAN. • IP Address Leave blank. •...
-
Page 35: Chapter 5-0 Management
Chapter 5-0 Management Topics dealt with in this section are to do with the management of the router. 5-1 PC Database The PC Database contains a list of all the computers attached to the local LAN and wireless LAN. This database performs the following functions: It maintains a list of all the DHCP Clients which have been allocated a Dynamic IP address by the router. -
Page 36: Pc Database - Advanced Administration
5-1-1 Advanced Administration This allows the user to add computers with Fixed IP addresses to the PC Database or to add a computer to the list which are not connected to the the local LAN. Figure 32. PC Database - Advanced Administration Properties •... -
Page 37: Password
5-2 Password This feature allows the administrator to manage the router’s password. For security reasons, it is strongly recommended that you set Passwords so that only authorized persons are able to manage this router. If the Password is left blank, all users on your network can access this router simply by entering the unit’s IP Address into their web browser. -
Page 38: Remote Access
5-3 Remote Administration This feature allows the router to be managed from a device on the Internet. (i.e. via the ADSL WAN port). Figure 34. Remote Administration Remote Administration • Enable: Check the tickbox to allow the router to be managed via the Internet. If disabled, the router will not respond to requests via the ADSL WAN port. This screen also shows the Current IP address of the WAN port of the router. -
Page 39: Network Diagnostics
5-4 Network Diagnostics Figure 35. Network Diagnostics Ping This function allows you to test the connection between the router and LAN or between the router and internet. • IP Address: Enter an IP address of a device which is either on the Local LAN or on the WAN. Then click Ping. DNS Lookup This function allows you to look up the address of a Domain Name of URL using a Domain Name Server. -
Page 40: Log
5-5 Logs The Log application provides the administrator with the ability to trace internet connections. When viewing the Log information, an administrator can send the record to specific LAN PCs to have real time monitoring. Figure 36. Log Settings Logs This shows the current log file for the router. •... -
Page 41: Email
5-6 E-Mail This allows the status of the router to be emailed to a specific email account. Figure 37. E-Mail Settings E-mail Notification • Turn E-mail Notification on: Check this box if you wish to enable email notification. • Send this to E-mail Address: Enter the email address of the user that wishes to receive the notification. •... -
Page 42: Config Files
5-7 Config File This function allows you to save the router’s configuration as backup, or retrieve the configuration file you saved before turning the setting back. Figure 38. Backup & Restore Configuration • Backup Config : Click the “Backup” button to save the current configuration as a backup file. You will be asked where you want to store the file on your local computer. -
Page 43: Firmware Upgrade
5-8 Upgrade Firmware This setting page allows you to upgrade to the latest version of firmware to keep your router up-to-date. Before you upgrade the firmware, you have to get the latest firmware and save it on the PC you use to configure the router. Figure 39. -
Page 44: Chapter 6.0: Troubleshooting
Chapter 6.0: Trouble Shooting This chapter provides solutions to problems you may encounter during installation and operation of your router. Hardware Q: The Power LED is off. Check the power cable is properly connected to the router, the power adapter and the socket. Q: The LAN Link LED is off. -
Page 45: Appendix A: Frequently Asked Questions
Appendix A: Frequently Asked Questions Q: What is the maximum number of IP Addresses the router can support? The router can support up to 253 IP Addresses in the range of 192.168.0.2~192.168.0.254. Q: Where should the router be installed on the network? In a typical environment, the router should be installed between the ISP and your LAN. -
Page 46: Appendix B: Technical Specifications
Appendix B: Technical Specifications Standards Compliance ADSL G.dmt for 8Mbps downstream & 640Kbps upstream ADSL G.lite for 1.5Mbps downstream & 512Kbps upstream IEEE 802.3 10/100BASE-T/TX IEEE 802.11g Wireless IEEE 802.11b Wireless Interface One ADSL interface RJ-11 connector WAN Four 10/100Mbps auto-sensing Ethernet RJ-45 connectors Management Web-based UI Management LED Display...