Status - Corega COR-WLBAR-AA User Manual

3-3 Status

The Status page shows the status of the router.
Modem
• Modem Status
• DownStream Connection Speed
• UpStream Connection Speed
• VPI
• VCI
Internet
• Connection Method
• Internet Connection
• Internet IP Address
LAN
• IP Address
• Network Mask
• DHCP Server
• MAC Address
Wireless
• Name (SSID)
• Region
• Channel
• Wireless AP
• Broadcast SSID
System
• Device Name
• Firmware Version
Possible options are "Connecting" (when establishing an ADSL connection) and "Connected" (when the ADSL link is
active).
This is the speed of the ADSL link from the ISP to the router. The actual speed is dependent upon a number of
parameters including your distance from the ISP's ADSL equipment, and the number of other users also connected to
their equipment.
This is the speed of the ADSL link from the router to the ISP.
The VPI ADSL parameter
The VCI ADSL parameter
Possible options are PPPoE, PPPoA, Dynamic IP, Static IP, Classical IP and Modem. These are selected in the One-Page-
Setup.
This shows the status, either active or idle.
This is the IP address assigned to the router by your ISP.
This is the first IP address that would be assigned by the internal DHCP Server. To change this value go to DHCP.
This is the subnet mask associated with the DHCP network IP address.
Shows either enabled or disabled.
This is the physical MAC level address of the WAN (ADSL) port of the router.
This is the SSID of the router. The default is "corega".
This is selected from the One-Page-Setup. Different regions support different numbers of wireless channels.
The active wireless channel. To change, go to One-Page-Setup.
This shows that the internal wireless access point is active.
This shows if the router is broadcasting the SSID name that it is using.
Shows the device Name
The revision of the router firmware.
14