Python 872 Owner's Manual page 79

Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
1. Open a door.
2. Turn the ignition on, then off.
3. Select a Menu. Press and hold the Control button. The number of siren chirps
indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2 and
3 chirps for menu 3.
4. When the desired menu chirps are heard, release the Control button.
5. Select a Feature. Press and release the Control button the number of times
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
6. Program the Feature. While holding the Control button, you can program the
feature using the remote control.
For features with only two options; = option 1 while = option 2.
For features with more than two options; selects the options in ascending order,
AUX AUX
while selects them in descending order.
AUX
AUX
Note: Pressing button resets the feature to the factory default.
AUX
Once a feature is programmed:
• Other features can be programmed within the same menu
• Another menu can be selected
• The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then press the Control button once more and hold it.
To select another menu:
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-
cating which menu has been accessed.
The learn routine exits if any of the following occurs:
• The open door is closed
• The ignition is turned On
• There is no activity for 30 seconds
• The Control button is pressed too many times
Bitwriter - Only Options
If programming with the Bitwriter®, the learn routine can be locked or un-
locked. If the learn routine has previously been locked, it must be unlocked
with Bitwriter® - this cannot be done manually with the Control button.
The Bitwriter® gives you access to a wider range of system options. These
features and the adjustments that may be programmed are described in the table
below. Default settings are in bold type.
Menu Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
Item
1 Zone 4 Sensor Type None Shock/ Field Tilt Sen- Glass Break (5)/
Omni Distur- sor Ultrasonic (6)
bance
2 Siren Duration 30 sec. Options: 1 to 180 sec.
3 Aux/Trunk Icon Type Trunk Window Sunroof Audio Lights/Left dr/Right
dr/Rear Hatch
4 Aux 1 Timed Output 30 sec. Options: 1 to 90 sec.
5 Aux 1 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
6 Aux 2 Timed Output 30 sec. Options: 1 to 90 sec.
7 Aux 2 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
© 2011 Directed Electronics. All rights Reserved.
8 Aux 3 Timed Output 30 sec. Options: 1 to 90 sec.
9 Aux 3 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
10 Aux 4 Timed Output 30 sec. Options: 1 to 90 sec.
11 Diesel Start Delay 15 sec. Options: 1 to 90 sec.
Timer
12 Timer Mode Runtime 12 min. Options: 1 to 16 min.
13 Timer Mode Starts 6 starts Options: 1/2/3/4 to 24 (Starts) in increments of 2
14 Timer mode intervals Options: 1/2/3/4 to 24 in 2 hour increments
3 hr.
15 Smart start low temp Options: OFF, -20° to 70° in 10° increments
0° (F)
16 Smart start high temp Options: OFF, 40° to 130° in 10° increments
100° (F)
17 Smart start low bat- 10.5V Options: OFF, 9V to 12.5V in 0.5V increments
tery (volts)
18 Sensor 1 Level 7 Options: 0 to 15 in increments of 1
19 6 Options: 0 to 20 in increments of 1
Starter Release
(normal)
Fine Tune
20 Feature Programming Unlocked Locked
21 Transmitter Program- Unlocked Locked
ming
22 Remote Start Runtime 12 min. Options: 1 to 60 min.
23 Virtual Tach Fine tune Not Ini- Options: Not initialized, 0 to 1000 in 50 millisecond
tialized increments
Feature Menus
Default settings are in bold type. New features are bold with grey background.
Menu 1 - Security
Menu Feature Opt. 1 Opt. 2 Opt. 3 Opt.4
Item
1 System Arming Mode Active Passive Arm Passive Auto re-arm
w/o lock Arm w/ w/o lock
lock
2 Panic Mode On Ign Off Off
only
3 Confirmation Chirps On w/Warn On w/ Off w/ Off w/
Warn Warn warn
chirps On
chirps Off chirps On chirps Off
4 Siren Duration 30 sec. 60 sec.
5 Ign-controlled Locks No Ign- Lock & Lock Only Unlock
Unlock Only
locking
6 Door Lock Pulses Single Double Double Double
Unlock Lock Only Lock &
Only Unlock
7 Door Lock Output 0.8 sec. 3.5 sec. 0.4 sec.
Duration
8 2nd Unlock 2nd unlock 2nd unlock
on Ign- on Ign-
control after control with
first unlock first unlock
9 Comfort Closure No Comfort Comfort Comfort
Closure 1 Closure 2
Closure
10 Horn Function Full Alarm Siren Func- Siren Func- Siren
Only tion 20 ms tion 30 ms Function
40 ms
11 Hood Switch type Normally Normally
Open
closed
12 Sensor Full trigger Single Double
13 Door Switch Type Normally Normally
open closed
14 Trunk Switch Type Normally Normally
open closed
15 Remote Button unlock On Off
(Ign off)
Menu 2 - Convenience
Menu Feature Opt. 1 Opt. 2 Opt. 3
Item
1 One-time Bypass One time One time
bypass bypass On
Off
2 Nuisance Prevention On Off
3 Override Pulse count 1 2 3
4 Door Trigger Error On Off
Chirp
5 Ign-controlled Dome On Off
light
6 OEM Alarm Disarm On Off
w/Aux-Trunk
7 OEM Alarm Disarm With Before Remote
Output Unlock Unlock Start Only
8 OEM Alarm Disarm 1 2
Pulses
9 Aux 1 Output type Validity Latch Latch/
reset/ign
10 Aux 1 Linking No Linking Link to Arm Link to
Disarm
11 Aux 2 Output Type Validity Latch Latch
reset/ign
12 Aux 2 Linking No Linking Link to Arm Link to
Disarm
13 Aux 3 Output Type Validity Latch Latch
reset/ign
14 Aux 3 Linking No Linking Link to Arm Link to
Disarm
Opt. 5+
15 Aux 4 Output Type Validity Latch Latch
reset/ign
Auto
re-arm w/
16 Aux 4 Linking No linking Link to Arm Link to
lock
Disarm
17 Aux/Trunk Output type Validity Off 2nd unlock
Menu 3 - Remote start
Menu Feature Opt. 1 Opt. 2 Opt. 3
Item
1 Transmission Mode Manual Automatic
2 Engine Checking Mode Virtual Voltage Off
Tach
3 Cranking Time 0.6 sec. 0.8 sec. 1.0 sec.
4 Remote Start Runtime 12 min. 24 min. 60 min.
5 Activation Pulse Count 1 2
6 Turbo Mode No Turbo On-1 min. On-3 min.
Mode
Siren Func-
7 Timer Mode Runtime 12 min. 3 min. 6 min.
tion 50 ms
8 Flex Relay Function Ignition 2 Acces- Starter 2
sory 2
9 Diesel Start Delay Wait-to Timed 15 Timed 30
Start input sec. sec.
10 Accessory during Diesel On Off
Start Delay
11 Status 2 Output Status Latch Rear Pulse Rear
Defogger Defogger
12 Parking Light Output Constant Pulsed Off
13 Anti-grind Output On Off
14 Tach Mode Starter Normal Increase
Release
Opt.4 Opt. 5+
15 Vehicle Temp Off On
Auto Report
16 Remote Start Safelock Off On
Remote Pairing
Prepare the vehicle system to be Paired with a new remote
4 5
1. Open a door.
2. Turn the key to the ON position.
3. Within 5 seconds press and release the Control button on the Control Center
one time.
Within 5 seconds, press and hold the Control button on the Control Center.
4.
The status LED will flash one time and the siren then chirps to confirm the vehicle
is ready for remote pairing.
5. Release the Control button and proceed below.
Note: If no remote pairing results, the system will exit after 60 seconds.
Prepare the new remote to be Paired with the system
30 sec. Off (5)/2nd
Remote Pair matches your LE remote to the system. Make sure the LE remote is set for
Timed unlock (6)
AUX
the desired Car 1 (Default) or Car 2 operation for the system it will be paired with.
Link to Link to
1. Press and hold the button for 8 seconds.
Arm/ Remote Start
Note: The LOCK LED indicator will turn on at 3 seconds. Please disregard and
disarm only
continue to hold.
30 sec. Off (5)/2nd
Wait for the Transmit LED to light solid and the remote to beep. Release the
2.
Timed unlock (6)
button.
Link to Link to
3. Press the for 1 second. The transmit LED will blink 3 times and beep 3
Arm/ Remote Start AUX
times.
Disarm only
4. Within 5 seconds, press the button.
30 sec. Off (5)/2nd
5. The vehicle siren will chirp and the LED indicators on the remote will light in
Timed unlock (6)
AUX
sequence with sound. You have now successfully learned the remote to the
Link to Smart Key
AUX
vehicle remote start and security system.
Arm/ Control (Link
6. Press the button two times to exit learn routine on the remote. The transmit
Disarm to Remote
Start Off) LED will turn off and exit tone will sound..
Note:
Please see installation guide for pairing with the 1-way companion remote.
30 sec. Off (5)/2nd
Timed Unlock (6)
Link to Link to A U X
Basic Remote Functions
Arm/ Remote Start
Disarm Only
DIRECT
Level
X 1
ACCESS
Button
ARM SILENT ARM SENSOR BYPASS
Opt.4 Opt. 5+ DISARM SILENT DISARM
REMOTE START RUNTIME RESET
Tachom-
A U X
eter
AUX TRUNK RELEASE AUX 1
1.2 sec. 1.4 (5)/ 1.6
A U X
(6)/ 1.8 (7) A U X A U X FUNCTION SHIFT CABIN TEMPERA-
TURE REQUEST
2.0 (8)/
(2-WAY ONLY)
4.0 (9)
Note: See Owner's guide for more details
Table of Zones
On-5 min. On- 10 min.
A zone is represented by the number of status LED flashes used by the
system to identify a particular type of input.
9 min.
Zone Description
1 Trunk Pin
Timed 45
sec. 2 Instant trigger: a heavier impact
detected by the onboard shock sensor
3 Door switch trigger
4 Instant trigger: For optional sensors
5 Ignition trigger
6 Hood Pin
Decrease
AUX
A U X A U X A U X
X 2 X 3 X 4
ARMED (SILENT ARMED (SILENT
SENSOR) TRIGGER)
VALET MODE CAR FINDER
TIMER MODE SMART START REAR DEFOGGER
AUX 2 AUX 3 AUX 4
ARM STATUS RUNTIME CHECK LAST TRIGGER
(2-WAY ONLY) (2-WAY ONLY) REQUEST
(2-WAY ONLY)
Input Description
H1/7 Blue wire
On board shock sensor.
H1/8 Green or H1/6 Violet wire
Optional MUX port
H3/1 Pink wire
H2/15 Grey wire
QRN5202 2011-03
2