Sensor Bypass; Remote Valet - Python 872 Owner's Manual

rublanced Commands: (level
2)
Press
and release the
f
button 2 times. The
f
and Aux LED's illumi-
nate indicating Level 2
Sensor Bypass
Press
and release
{5
Performing the Sensor Bypass command will incrementally bypass sen-
sor operations and be confirmed as follows:
• Warn-away bypass:
The Parking lights flash 2 times. The Arm
LED, 1 beep and 1 fault tone ploy to confirm. Sensors will be
activated for Full Trigger levels of impact only.
•
Warn-away & Full trigger bypass:
The Parking lights flash 3
times. The Arm LED, 1 beep and 2 fault tones play to confirm.
Sensors wi II not be activated for any level of impact.
• Sensor Bypass off:
The Parking lights flash 1 time. The Arm LED
and 1 beep play to confirm. Sensors ore fully operational.
Note
Remote Valet
~
Press
and release ()
Enters (or if On, exits} Valet Mode. The Control Center LED turns on
and off accordingly. The Disarm LED and Valet beeps play ( 1 for on,
2 for off} to confirm.
14 © 2009 Directed Electronics. All rights reserved.