IFM Electronic E2D400 Series User Manual page 147

E2D400 Series Panel PC
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the E2D400 series.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 Follow the electrostatic precautions outlined below whenever the E2D400
series is opened.
 Make sure the power is turned off and the power cord is disconnected
whenever the E2D400 series is being installed, moved or modified.
 Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
 Electric shocks can occur if the E2D400 series chassis is opened when the
E2D400 series is running.
 Do not drop or insert any objects into the ventilation openings of the
E2D400 series.
 If considerable amounts of dust, water, or fluids enter the E2D400 series,
turn off the power supply immediately, unplug the power cord, and contact the
E2D400 series vendor.
 DO NOT:
o
o
o
o
Drop the E2D400 series against a hard surface.
Strike or exert excessive force onto the LCD panel.
Touch any of the LCD panels with a sharp object
In a site where the ambient temperature exceeds the rated temperature
Page 137