Locating A Track Or A Particular Portion On A Cd - JVC KD-SC800 Instructions Manual

To stop play and eject the CD
Press 0.
CD play stops and the control panel flips down.
The CD automatically ejects from the loading
slot. The source changes to the tuner (you will
hear the last received station).
• If you change the source, the CD play also
stops (without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected CD is not removed for about 15
seconds, the CD is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
14
Press and hold ¢
while playing a CD, to
fast-forward the track.
Press and hold 4
while playing a CD, to
reverse the track.
To go to the next or previous tracks
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
,
, • To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
Press ¢
briefly,
while playing a CD, to go
ahead to the beginning of
the next track.
Each time you press the
button consecutively, the
beginning of the next tracks
is located and played back.
Press 4
briefly,
while playing a CD, to go
back to the beginning of
the current track.
Each time you press the
button consecutively, the
beginning of the previous
tracks is located and
played back.