Setting Display Colour Mode; Setting Brightness Mode - Cobra 29 LX EU Operating Instructions Manual

Operation
Setting Display

Setting Display Colour Mode

Colour Mode
1
Press Menu/Enter knob and scroll down to select
Display Colour.
NB/ANL
2
2 3
1.5
NB/ANL CAL
SWR
TX
ANL
RX
S/RF
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
SWR/CAL
Press and release Menu/Enter to set the colour.
VOL SQ DYNAMIKE
3
OFF MIN
Rotating Menu/Enter knob clockwise changes the
display colour from green to blue to amber to red
then back to green.
NB/ANL
4
Note
2 3
NB/ANL 1.5
CAL
SWR TX
ANL
Select EXIT to return to
RX
S/RF
S/RF
RF
main menu. Press Dim/Escape
SWR
CAL
button to return to CB mode. 3 5 7 9
1
SIG +30dB
SWR/CAL
Press Menu/Enter knob or escape button again
VOL SQ DYNAMIKE
to exit routine.
OFF MIN
22
SCAN
DISPLAY COLOR
MEM SCAN
BRIGHTNESS
CONTRAST
MEM
RF GAIN DELTA TUNE T BACK
MIN MAX OFF
TURN CH KNOB TO SCAN
SET COLOR MEM SCAN
EXIT
MEM
RF GAIN DELTA TUNE T BACK
MIN MAX OFF

Setting Brightness Mode

Press Menu/Enter knob to select Set Brightness
Rotate Menu/Enter knob clockwise to Select
Brightness. Press Menu/Enter knob to select
Day-Bright. Turn Menu/Enter clockwise to
CH 9/
increase brightness and turn anticlockwise to
19
decrease brightness.
ESC
SWR
CAL
To set the day bright level, turn the Menu/Enter
knob clockwise to a desired setting and then
press Menu/Enter. To set the Night-Dim level,
repeat instructions above then select Night-Dim.
TURN CH KNOB TO
SET LEVEL
CH 9/
19
Press Menu/Enter knob again to exit routine.
ESC
SWR
CAL
Operation
Setting
Brightness
Mode
Note
If an attempt is made to
exceed the highest or lowest
brightness levels, 1 error beep
will be heard.
Note
Exit will return to menu mode.
ESC will exit and return to CB
Standby.
Note
To select day or night levels,
press and release Dim/Escape
button once levels are set.
23